Jeeprint Installation Guide.

Simple Installation. Everything You Need Is Included. Your Jeeprint nameplate comes with the required screws and mirror-finish screw caps. Depending on the size of your nameplate, it will have 2 or 4 pre-drilled holes.

You can install it yourself with a drill, or get help from a local carpenter if required.

Installation with Screws & Mirror Caps

What You'll Receive

Customized nameplate with 2 or 4 pre-drilled holes

2 or 4 screws, depending on the nameplate size

Matching mirror-finish screw caps

Steps

Step 1 — Choose the Location

Place the nameplate against the wall where you want to install it. Use a level to make sure it is straight.

Step 2 — Mark the Holes

Use the pre-drilled holes in the nameplate as a guide and mark the drilling points on the wall with a pencil.

Step 3 — Drill the Wall

Remove the nameplate and carefully drill holes at the marked positions. Use an appropriate drill bit according to your wall type.

Step 4 — Fix the Nameplate

Place the nameplate back on the wall and insert the provided screws through the holes. Tighten the screws securely, but avoid over-tightening.

Step 5 — Add the Mirror Caps

Place the mirror-finish caps over the screw heads and secure them. Your nameplate is now ready!

Tip: For a clean and professional installation, make sure all holes are properly aligned before tightening the screws.

2. Installation with Double-Sided Tape

For walls where drilling is not possible

In certain situations, drilling may not be possible—for example, on specific wall surfaces or where you cannot make permanent holes.

For these cases, Jeeprint can provide an optional double-sided adhesive tape installation method.

Steps

Clean the wall thoroughly and make sure it is free from dust, oil and moisture.

Make sure the wall surface is smooth, dry and suitable for adhesive mounting.

Apply the provided double-sided tape evenly to the back of the nameplate.

Carefully position the nameplate on the wall.

Press the nameplate firmly against the wall for a few moments.

Allow the adhesive to bond properly before putting any pressure on the nameplate.

Important: Adhesive installation is recommended only for suitable, smooth surfaces. The holding strength can vary depending on the wall texture, paint, dust, moisture and surface condition.

What You Need

For Screw Installation

Drill machine

Appropriate drill bit

Pencil

Level (recommended)

For Tape Installation

Clean, dry wall surface

Provided double-sided adhesive tape

Installation Made Easy

Whether you choose screw mounting or double-sided tape, Jeeprint nameplates are designed to make installation simple.

Need Help With Installation?

We recommend contacting a local carpenter or professional installer if you are not comfortable using a drill.